Serie-ST Niple Intercambio Snap-Tite Serie 71 (Rosca Hembra)

Atributos

Presión de Operación Máxima	4000 PSI (275 bar)
Peso	2,84 lb
Break Quantity	0
Paquete Opcional/Cantidad por Caja	0
Material	Acero inoxidable 316
DE Máximo	1.55" (39.3 mm)
Rosca	Hembra NPTF
Tamaño de Cuerpo	1"
Rango de Temperatura	-40°F to 250°F (-40°C to 121°C)
Presión de Reventón	18500 PSI (1250 bar)
Medida de Rosca	1" - 11-1/2
Longitud	3.33" (84.6 mm)
Hex	2"

Detalles

Available Options

Contact Dixon for all available option adders
Standard seal options include: FKM, EPDM, Mil-Nitrile and Fuel Nitrile
Kalrez® seal options include: 4079, 6375 and 7075
Oxy-clean treatment is available

Compatibility & Interchange Data

Interchangeable with Snap-Tite 71-Series

Construction

Machined components are manufactured using solid bar stock
Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Steel coupler sleeves are hardened to resist deformation and maximize service life.
Nitrile (Nitrile Rubber) seals are standard
Incorporates PTFE anti-extrusion rings to protect seal components from dynamic impulse damage.

Note

Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation.

Recursos