Acoplador con Rosca Macho Manga con Brida Moleteada Intercambio Thor Dual-Lock®

Atributos

Presión de Operación Máxima	300 PSI (20 bar)
Peso	0,62 lb
Break Quantity	0
Paquete Opcional/Cantidad por Caja	0
Material	Acero
Rosca	NPTF
Tamaño de Cuerpo
Rango de Temperatura	6" grooved manifold with six 2" female NT ports, one 1" NPT port (left or right version)°F (Not pressure retaining, open flow only°C)
Presión de Reventón
Medida de Rosca

Detalles

Compatibility & Interchange Data

Thor Finger-Lock Interchange
Interchanges with National A type, Campbell Double-Lock and Thor PHC series couplings

Construction

Machined components are manufactured using solid bar stock.
Nitrile (Nitrile Rubber) seals are standard
Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve. 2-Piece Sleeve has a phosphor bronze spring.
Steel componentry is plated using ROHS Compliant Trivalent Chrome.

Safety Notes

It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Recursos