Residential Sprinkler Control Cabinets

Optional Package/Box Quantity	1

Security Lockable cabinet door is fitted with a 003 Fire Industry common key and break glass key holder. Service book holder incorporated in door.
Provision for six spare sprinkler heads with cabinet

The incoming and outgoing pipe connections are DN50 (60.3mm OD) roll grooved mechanical couplings. Various adaptors are available to connect to different pipe sizes and pipe types.
The cabinet can be fitted between the wall studs or surface mounted.
The authority having jurisdiction may require the cabinet to be located in a highly visible position.
Water pressure and flow rates should be confirmed as adequate.
The test and drain line must be piped to waste. Electrical connections to be installed and tested by authorised personnel.

Each Section can be dismantled by authorised service personnel should any service be required. Components requiring service can be removed and replaced or serviced on site.
Advise the local authority that the system is being shut down for servicing
Dismantling of electrical connections should be performed by qualified personnel
Shut down water supply from my supply
Shut down monitored valve from cabinet. Dismantle the roll groove coupling or the mechanical tee to test and drain. The couplings can be re-used take care when removing.
Drain down water from system at test and drain valve.
Alternative: Complete cabinet can be removed.

All components are available and can be supplied ex-stock.

Pressure tested to 2100 kPa

FFS-RSCC - Residential Sprinkler Control Cabinets