Specifically designed for the operation of liquid terminals in batch loading and protection against overfilling, unloading, tank cars, tank trucks, marine barges, suitable for open and closed dome.

• Standard probe lengths of 24", 36", 48" and 60", other lengths available
• Optional opto-isolated solid state contact output

Wetted materials: 316 stainless steel, PTFE standard, other materials available

• Fully autonomous; without cables, tubes or external power
• Robust construction resistant to weather and corrosion
• No moving parts, tip-sensitive Phase Shift™ digital capacitance sensor for conductive and non-conductive fluid
• No calibration or adjustment required
• Runs up to 2500 hours on a single 9V alkaline battery
• Adjustable insertion length via standard 1/2" NPT connector
• High intensity flashing visual and audible outputs
• Graduated and full laser engraved rod.
• Fail-safe continuous battery monitor goes into alarm state on low battery
• Activation point 1/4" into the liquid
• Battery current consumption <0.23 ma during standby mode; <50 ma in alarm status
• Horn intensity 101 dB at 2'
• Light output 3 high intensity flashing LEDs of 3000 mcd each
• Capacitance Phase Shift Probe
• Cable gland standard 1/2 NPT
• Minimum dielectric constant 1.8

Intrinsically safe design per ANSI/UL913 Class I, Div I Groups A, B, C and D Hazardous Areas